Tin tức

Reducing tee

Reducing tee, also known as welding rods, are stainless steel accessories made of stainless steel materials such as 304, 316… often used in system pipes. Stainless steel pipes are specifically designed with a T-shaped configuration to easily connect pipeline systems together and divide and redirect fluid flows into two perpendicular branches. Among these two branches, there will be 1 branch the size of the arrowhead and 1 branch smaller than the arrowhead.

Because stainless steel has outstanding properties such as high shine, is less affected by environmental activities, and is resistant to oxidation, it is often chosen to be used in many systems, especially for microbiological system.

Detailed information about stainless steel reducer

Similar to the stainless steel pan, the stainless steel reducer is also a T-shaped stainless steel accessory, with the task of branching the flow, but one branch will have a smaller diameter than the other two branches.

Classification of stainless steel pangolins reduced

With reduced stainless steel, we now have many things to classify such as:

  • Classified by material made from stainless steel such as: 304 stainless steel, 316 stainless steel…
  • Classified by thickness as: SCH10/SCH20/SCH40
  • Classified by connection type: externally threaded stainless steel sockets, internal threaded stainless steel sockets

Advantages of stainless steel welding reducer.

  • Can be used in different environments such as water, chemicals, gas…
  • The stainless steel rack is cast in one piece so the surface of the rack does not leak
  • High safety, guaranteed
  • It can be easily connected to parts of the pipeline system, helping to shorten construction time

Application of stainless steel welding reducer.

  • Stainless steel reducers are widely used on current pipeline systems. We can easily see this type of accessory commonly used on various system factories such as.
  • Pipeline systems for clean water, wastewater, and water supply systems for high-rise buildings.
  • Highly corrosive chemical solutions such as acids, bases, salts, etc.
  • Factories producing soft drinks, food processing, cement and paper industries…
Reducing tee
Reducing tee

Size standard table for stainless steel reducers

Stainless steel welding products at QMS usually comply with ASME B16 standards. 9:

Nominal pipe size

(NPS)

(inch)

 Outside diameter Center to End
Run

(2 large branches below)

(OD)

(mm)

 Outlet

(small branch above)

(OD)

(mm)

 Run,

C

(mm)

 Outlet,

M

(mm)
1⁄2 x 1⁄2 x 3⁄8 21.3 17 25 25
1⁄2 x 1⁄2 x 1⁄4 21.3 14 25 25
3⁄4 x 3⁄4 x 1⁄2 26.7 21 29 29
3⁄4 x 3⁄4 x 3⁄8 26.7 17 29 29
1 x 1 x 3⁄4 33.4 27 38 38
1 x 1 x 1⁄2 33.4 21 38 38
1 1⁄4 x 1 1⁄4 x 1 42.2 33 48 48
1 1⁄4 x 1 1⁄4 x 3⁄4 42.2 27 48 48
1 1⁄4 x 1 1⁄4 x 1⁄2 42.2 21 48 48
1 1⁄2 x 1 1⁄2 x 1 1⁄4 48.3 42 57 57
1 1⁄2 x 1 1⁄2 x 1 48.3 33 57 57
1 1⁄2 x 1 1⁄2 x 3⁄4 48.3 27 57 57
1 1⁄2 x 1 1⁄2 x 1⁄2 48.3 21 57 57
2 x 2 x 1 1⁄2 60.3 48 64 60
2 x 2 x 1 1⁄4 60.3 42 64 57
2 x 2 x 1 60.3 33 64 51
2 x 2 x 3⁄4 60.3 27 64 44
2 1⁄2 x 2 1⁄2 x 2 73 60 76 70
2 1⁄2 x 2 1⁄2 x 1 1⁄2 73 48 76 67
2 1⁄2 x 2 1⁄2 x 1 1⁄4 73 42 76 64
2 1⁄2 x 2 1⁄2 x 1 73 33 76 57
3 x 3 x 2 1⁄2 88.9 73 86 83
3 x 3 x 2 88.9 60 86 76
3 x 3 x 1 1⁄2 88.9 48 86 73
3 x 3 x 1 1⁄4 88.9 42 86 70
3 1⁄2 x 3 1⁄2 x 3 101.6 89 95 92
3 1⁄2 x 3 1⁄2 x 2 1⁄2 101.6 73 95 89
3 1⁄2 x 3 1⁄2 x 2 101.6 60 95 83
3 1⁄2 x 3 1⁄2 x 1 1⁄2 101.6 48 95 79
4 x 4 x 3 1⁄2 114.3 102 105 102
4 x 4 x 3 114.3 89 105 98
4 x 4 x 2 1⁄2 114.3 73 105 95
4 x 4 x 2 114.3 60 105 89
4 x 4 x 1 1⁄2 114.3 48 105 86
5 x 5 x 4 141.3 114 124 117
5 x 5 x 3 1⁄2 141.3 102 124 114
5 x 5 x 3 141.3 89 124 111
5 x 5 x 2 1⁄2 141.3 73 124 108
5 x 5 x 2 141.3 60 124 105
6 x 6 x 5 168.3 141 143 137
6 x 6 x 4 168.3 114 143 130
6 x 6 x 3 1⁄2 168.3 102 143 127
6 x 6 x 3 168.3 89 143 124
6 x 6 x 2 1⁄2 168.3 73 143 121
8 x 8 x 6 219.1 168 178 168
8 x 8 x 5 219.1 141 178 162
8 x 8 x 4 219.1 114 178 156
8 x 8 x 3 1⁄2 219.1 102 178 152
10 x 10 x 8 273 219 216 203
10 x 10 x 6 273 168 216 194
10 x 10 x 5 273 141 216 191
10 x 10 x 4 273 114 216 184
12 x 12 x 10 323.8 273 254 241
12 x 12 x 8 323.8 219 254 229
12 x 12 x 6 323.8 168 254 219
12 x 12 x 5 323.8 141 254 216
14 x 14 x 12 355.6 324 279 270
14 x 14 x 10 355.6 273 279 257
14 x 14 x 8 355.6 219 279 248
14 x 14 x 6 355.6 168 279 238
16 x 16 x 14 406.4 356 305 305
16 x 16 x 12 406.4 324 305 295
16 x 16 x 10 406.4 273 305 283
16 x 16 x 8 406.4 219 305 273
16 x 16 x 6 406.4 168 305 264
18 x 18 x 16 457 406 343 330
18 x 18 x 14 457 356 343 330
18 x 18 x 12 457 324 343 321
18 x 18 x 10 457 273 343 308
18 x 18 x 8 457 219 343 298
20 x 20 x 18 508 457 381 368
20 x 20 x 16 508 406 381 356
20 x 20 x 14 508 356 381 356
20 x 20 x 12 508 324 381 346
20 x 20 x 10 508 273 381 333
20 x 20 x 8 508 219 381 324
22 x 22 x 20 559 508 419 406
22 x 22 x 18 559 457 419 394
22 x 22 x 16 559 406 419 381
22 x 22 x 14 559 356 419 381
22 x 22 x 12 559 324 419 371
22 x 22 x 10 559 273 419 359
24 x 24 x 22 610 559 432 432
24 x 24 x 20 610 508 432 432
24 x 24 x 18 610 457 432 419
24 x 24 x 16 610 406 432 406
24 x 24 x 14 610 356 432 406
24 x 24 x 12 610 324 432 397
24 x 24 x 10 610 273 432 384
26 x 26 x 24 660 610 495 483
26 x 26 x 22 660 559 495 470
26 x 26 x 20 660 508 495 457
26 x 26 x 18 660 457 495 444
26 x 26 x 16 660 406 495 432
26 x 26 x 14 660 356 495 432
26 x 26 x 12 660 324 495 422

The wall thickness (T, wall thickness) of stainless steel welding rods still complies with ASME B36 standards. 10M, B36. 19M.

Contact QUANG MINH INOX for a quote now!

If you are looking for a supplier of stainless steel welding sockets, looking for sockets with NPS > 26 as well as other stainless steel accessories such as 45 degree stainless steel sockets, 90 degree stainless steel sockets, concentric and eccentric sockets,… welcome. Please contact HOTLINE: 0906.345.304 for advice and quote immediately!

admin

Là một chuyên gia trong lĩnh vực ngành hàng inox, hy vọng những thông tin tôi cung cấp sẽ giúp ích cho quý khách hàng trong việc chọn lựa sản phẩm inox chất lượng.